
Page 32
Connectors and Cables
TS-9720EN Series Progressive Scan Shutter Cameras
5 Connectors and Cables
5.1 Connector Pin Configurations
5.1.1 12-Pin Connector
FIGURE 11. 12-Pin Connector
The TS-9720EN has a 12-pin Hirose connector for power input, serial
communication, and signal integration. Pin #1 is Ground and Pin #2 is
+12V DC. Other pins handle a number of input and output functions,
as shown in Table 2 below.
TABLE 2. 12-Pin Connector
5.1.2 High-Density 26-Pin D-Sub Connector
The TS-9720EN has a 26-pin MDR26 connector (3M part number 10226-6212VC) on the rear panel.
The connector pin-out is shown in Table 3 below.
FIGURE 12. 26-Pin HD-Sub Connector
Pin Description Pin Description
1 GND (power) 7 Reserved
2 +12V DC 8 Flash strobe output
3 GND (analog) 9 Reserved
4 Test point 10 RXD (RS-232) PowerPC debug
port
5 GND (digital) 11 Reserved
6 Trigger input 12 TXD (RS-232) PowerPC debug
port
TABLE 3. D-Sub Connector Pinout Configurations (10226-6212 VC)
High-Density 26-Pin D-Sub Connector (Female)
Pin # Description I/O Pin # Description I/O
1 GND (Power) 14 Tamper Input In
2 +12V Input Out 15 Reserved Out
3 RxD for Laser Detector
(TTL)
In 16 LVD / IO Selector Out
4 TxD for Laser Detector
(TTL)
Out 17 Ethernet D+ (spare) -
5 DIR Control for Laser
Detector (TTL)
Out 18 Ethernet A- Out
1
2
3
4
5
6
9
8
7
11
12
10
Komentáře k této Příručce